工业用水性丙烯酸面漆的制备

肖菲[1];杨敬霞[1];孙学军[1];史芳沅[1];吴柏君[1];周春宇[1]

PDF(3018 KB)

现代涂料与涂装 ›› 2020, Vol. 23 ›› Issue (4) : 1-3.

工业用水性丙烯酸面漆的制备

肖菲[1];杨敬霞[1];孙学军[1];史芳沅[1];吴柏君[1];周春宇[1]

作者信息 +

Preparation of Waterborne Acrylic Topcoat for Industry

XIAO Fei[1];YANG Jing-xia[1];SUN Xue-jun[1];SHI Fang-yuan[1];WU Bai-jun[1];ZHOU Chun-yu[1]

Author information +

文章历史 +

摘要

采用乳液聚合方法制备水性丙烯酸乳液,以该丙烯酸乳液为成膜物质制备水性丙烯酸面漆,其各项性能指标可以达到HG/T 4758—2014中Ⅱ型水性丙烯酸树脂涂料标准要求。同时研究了乳液玻璃化温度、成膜助剂用量和配比及其他水性助剂对涂膜性能的影响。

Abstract

The waterborne acrylic emulsion was prepared by emulsion polymerization,which was used as film forming material to prepare water-based ar.rylic topcoat.The performance indicators can meet the requirements of HG/T 4758—2014 waterborne acrylic coatings standard for type II coatings.The amount and ratio of film-forming agent and the effect of glass transition temperature on the properties of emulsion were studied.

导出引用

肖菲[1];杨敬霞[1];孙学军[1];史芳沅[1];吴柏君[1];周春宇[1]. 工业用水性丙烯酸面漆的制备[J]. 现代涂料与涂装. 2020, 23(4): 1-3

XIAO Fei[1];YANG Jing-xia[1];SUN Xue-jun[1];SHI Fang-yuan[1];WU Bai-jun[1];ZHOU Chun-yu[1]. Preparation of Waterborne Acrylic Topcoat for Industry[J]. Modern Paint & Finishing. 2020, 23(4): 1-3

中图分类号： TQ633