铸件面漆起泡问题探讨和控制措施

谭涛[1];秦燕[1];胡博龙[1];周小龙[1]

PDF(1911 KB)

现代涂料与涂装 ›› 2023, Vol. 26 ›› Issue (8) : 19-21.

铸件面漆起泡问题探讨和控制措施

谭涛[1];秦燕[1];胡博龙[1];周小龙[1]

作者信息 +

Discussion on Bubble Problem of Paint and Its Control Measures

TAN Tao[1];QIN Yan[1];HU Bo-long[1];ZHOU Xiao-long[1]

Author information +

文章历史 +

摘要

介绍了铸件面漆起泡气体的来源,采用一系列试验对铸件面漆起泡的影响因素进行分析,最终得出了铸件面漆起泡的主要原因,通过铸件毛坯先进先出、涂装上线时间调整、涂装工艺优化等措施,铸件面漆起泡问题得到了有效控制。

Abstract

The source of foaming of casting topcoat was introduced,and the influencing factors of foaming of casting topcoat were analyzed by a series of experiments.Finally,the main causes of foaming of casting topcoat were obtained.The foaming problem of casting topcoat was effectively controlled by the measures of first-in,first-out of casting blank,adjustment of painting time and optimization of painting process.

导出引用

谭涛[1];秦燕[1];胡博龙[1];周小龙[1]. 铸件面漆起泡问题探讨和控制措施[J]. 现代涂料与涂装. 2023, 26(8): 19-21

TAN Tao[1];QIN Yan[1];HU Bo-long[1];ZHOU Xiao-long[1]. Discussion on Bubble Problem of Paint and Its Control Measures[J]. Modern Paint & Finishing. 2023, 26(8): 19-21

中图分类号： TQ639