浅谈内外饰塑料件喷涂咬底情况的控制方法

徐光耀[1];贾鹏鹏[1];徐云郎[1];张立兵[1];姚致鹏[1];郭书庚[1];韩丹[1];赵婷[1]

PDF(2302 KB)

现代涂料与涂装 ›› 2024, Vol. 27 ›› Issue (7) : 64-66.

浅谈内外饰塑料件喷涂咬底情况的控制方法

徐光耀[1];贾鹏鹏[1];徐云郎[1];张立兵[1];姚致鹏[1];郭书庚[1];韩丹[1];赵婷[1]

作者信息 +

Discussion on the Control Method of Spraying and Biting the Bottom of Plastic Parts for Internal and External Decoration

XU Guang-yao[1];JIA Peng-peng[1];XU Yun-lang[1];ZHANG Li-bing[1];YAO Zhi-peng[1];GUO Shu-geng[1];HAN Dan[1];ZHAO Ting[1]

Author information +

文章历史 +

摘要

主要阐述了内外饰塑料件喷漆后咬底情况的原因分析,并从材料、工艺等方面给出优化方案。

Abstract

This paper mainly expounds the cause analysis of the bottom biting situation of the interior and exterior plastic parts after painting,and gives the optimization scheme from the aspects of material,process and so on.

导出引用

徐光耀[1];贾鹏鹏[1];徐云郎[1];张立兵[1];姚致鹏[1];郭书庚[1];韩丹[1];赵婷[1]. 浅谈内外饰塑料件喷涂咬底情况的控制方法[J]. 现代涂料与涂装. 2024, 27(7): 64-66

XU Guang-yao[1];JIA Peng-peng[1];XU Yun-lang[1];ZHANG Li-bing[1];YAO Zhi-peng[1];GUO Shu-geng[1];HAN Dan[1];ZHAO Ting[1]. Discussion on the Control Method of Spraying and Biting the Bottom of Plastic Parts for Internal and External Decoration[J]. Modern Paint & Finishing. 2024, 27(7): 64-66

中图分类号： TQ639